Standard Products

EC500
The self-developed PEM electrolytic water hydrogen production plate realizes lightweight and mass manufacturing on the basis of high structural strength, sealing safety and long life, and can be assembled with electrolyzer to produce 0.5-50 standard square of hydrogen per unit time.
Learn more|
ITEM |
UNIT |
TECHNICAL PARAMETER |
|
Hydrogen Generation Rate per Unit Time |
Nm3/h |
0.5~50 |
| Material |
|
TA1 |
| Raw material thickness |
mm |
0.5 |
| Length |
mm |
397 |
| Width |
mm |
281 |
| Polar plate thickness (without seal) |
mm |
2.6 |
|
Polar plate Quality (without seal) |
g |
246 |
| Maximum Length of the Reaction Zone | mm |
242 |
| Maximum Width of the Reaction Zone |
mm |
230 |
| Recommended reaction area | cm² |
500 |
| Life span |
h |
≥ 40000 |
|
|
|
OTHER CONFIGURATION |
| Inspection mode |
Spigot pin / Inserting pin |
|
| Seal washer |
|
- |
|
Plastic-covered border |
|
Assorting |
| Test suite |
|
Assorting |

EC1500
The self-developed PEM electrolytic water hydrogen production plate realizes lightweight and mass manufacturing on the basis of high structural strength, sealing safety and long life, and can be assembled with an electrolytic cell with a hydrogen production of 1-200 standard square per unit time.
Learn more|
ITEM |
UNIT |
TECHNICAL PARAMETER |
|
Hydrogen Generation Rate per Unit Time |
Nm3/h |
1~200 |
| Material |
|
TA1 |
| Raw material thickness |
mm |
0.3 |
| Length |
mm |
794 |
| Width |
mm |
417 |
| Polar plate thickness (without seal) |
mm |
0.9 |
|
Polar plate Quality (without seal) |
g |
376 |
| Maximum Length of the Reaction Zone | mm |
488 |
| Maximum Width of the Reaction Zone |
mm |
375 |
| Recommended reaction area | cm² |
1800 |
| Life span |
h |
≥ 40000 |
|
|
|
OTHER CONFIGURATION |
| Patrol inspection method |
Spigot pin / Inserting pin |
|
| Sealing scheme |
|
Dimensional drawings available |
|
Test suite |
|
Assorting |
| Adaptive titanium felt |
|
Assorting |

Composite Titanium Felt
The composite titanium felt with gradient structure not only reduces the energy consumption of hydrogen production, improves the strength of components, but also adapts to a variety of complex working conditions, which is conducive to improving the hydrogen production.
Learn more|
ITEM |
UNIT |
TECHNICAL PARAMETER |
|
Minimum particle diameter of PTL |
μm |
<30 |
| Minimum particle diameter of MPL layer |
μm |
<10 |
| porosity |
|
≈ 60% |
| Maximum size |
mm |
600*800 |
| Thickness |
mm |
0.3~0.6 |
| Roughness | μm |
<20 |
|
coating |
|
Customizable |

Test tooling
Small and convenient, can achieve large electrolytic cell working condition benchmarking experiment, reduce manpower, material and other expenditure costs.
Learn more|
ITEM |
UNIT |
TECHNICAL PARAMETER |
|
Active area |
cm2 |
25 |
| Test kit size |
mm |
90*90*20 |
| Rated current |
A |
≤75 |
| Total voltage |
V |
≤2.0 |
| Power |
KW |
≤0.15 |
| Load range |
% |
0~150 |
|
Hydrogen pressure |
Mpa |
≤3 |
| Oxygen pressure | Mpa |
≤2 |
| Water discharge |
ml/min |
≤125 |
| Inlet temperature | ℃ |
≤80 |
|
|
OTHER CONFIGURATION |
|
|
Inspection mode |
|
Inserting pin |
| Adaptive MEA |
Dimensional drawings available |
|
| Adaptive titanium felt |
|
Assorting |
|
Surface coating |
|
Customizable |
Contact Us
Mailbox: sales@shanghaizhizhen.com
Address: Building 5, No. 1555 Cenglin Road, Lingang New Area, China (Shanghai) Pilot Free Trade Zone